OPERATOR’S MANUAL500 POUNDSPOWERFULLIGHTWEIGHTVERSATILEMODEL#OBH-500P.O. Box 845, Winona, MN 55987Phone (800) 749-1064 (507) 474-6250Tech Support (507
Braking and Winding DevicesBRAKING• Braking is via a mechanical brake and an electronic generated brake. The brake distance from time of braking until
Trouble ShootingIf the hoist fails to start after several attempts or the hoist’s operation appears tobe defective check the following:OBSERVEDANOMALY
pg.12Warnings Guarantee/Warnings Not Adhering to the following warnings may result in personal injury or equipment damage.1. Do not try to lift more t
pg.13OBH-500 Parts BreakdownNUMBER PART DESCRIPTIONOBH500 - 1 MOTOR COVER *OBH500 - 2 SCREWSOBH500 - 3 SCREWSOBH500 - 4 PLT COVER PROTECTIONOBH500 - 5
pg.14NUMBER PART DESCRIPTIONTBH500 - 42 OUTPUT SHAFT *TBH500 - 43 KEYTBH500 - 44 MAIN BODY BASE *TBH500 - 44-1 STICKERTBH500 - 45 BEARINGTBH500 - 46 F
Service Notespg.15
P.O. Box 845, Winona, MN 55987Phone (800) 749-1064 (507) 474-6250Tech Support (507) 457-3346Fax (507) [email protected]
IntroductionThe OZ Builder’s Hoist is designed for commercial building sites, as well as various construction workplaces, such as warehousing, buildin
Specicationspg.3Product # OBH-500Horse Power 1.3HPDepth (L) 7.04 inchesWidth (W) 9.44 inchesHeight (H) 25.93 inchesHousing Length (HL) 13 inche
pg.4Enviroment PrecautionsThe following environmental conditions may affect the operation of the hoist.InstallationPOWER CORD INSERTION • Insert the p
pg.5InstallationWorking MethodMOUNTING • The hoist is designed to be hung or mounted on a rm or stable bar or bracket. Which ensures the hoist doesn’
pg.6Working MethodHandling PrecautionsUP AND DOWN CONTROL SWITCH To Lift a Load. Press Button To Lower a Load. Press ButtonPay close attention to
pg.7Handling PrecautionsOperating PrecautionsPay close attention to the following instructions. Incorrectly operating the hoist may result in personal
Periodic Inspection pg.8TimingPARTS CHECKS CHECKING METHOD DAILY3 MTHS/20 HRS1 YEAR3 YEARSPerformance Wearing of pressed plate Broken springsVisual De
Wire Rope Replacement pg.9GRADE• The hoist is tted with 7 x19 G190 IWRC wire rope. When replacing rope ensure 7 x19 is used with a minimum of grade 1
Comments to this Manuals